D125 Cleaning Cartridge
When installing a new cleaning cartridge and pressing #9 and the Stop button at the same time and answering Yes to the question "Did you replace the cleaning cartridge?", when looking at the Supplies...
View ArticleClik here to view.
Multicoloured Banding Xerox Phaser 6600
Hello, does anyone know what could be causing the below multicolored banding? Many thanks
View ArticleCollating on 6204
Does anyone know if you can collate when sending drawings to plot on the Xerox 6204?Doing this from UG NX8.5 which does not use the windows print driver.Thank you. Brad
View Article7428 Shutdowns All Lights Flashing
Xerox 7428 is unstable. Seems to freeze-shutdown without warning. Blue buttons and energy saver lights all flash and the device does not respond to on-off switch. Must be disconnected from mains and...
View ArticleXerox WorkCentre 7545 printing the wrong colors
After four years working fine the WC 7545 stopped to print the color images with the real colorsNothing changed on the driver side from the server or the user client machines, so far. But all the users...
View ArticleProxy Not Found when trying to Register a Printer
We use CentreWare to help us mange our Xerox printers. We are in the process of moving our installation to a new server and are in the process of connecting all the printers. We have several reports...
View ArticlePrinting PRN file with 2 merge PDF files using PJL
Hi We are attempting to use PJL language to print a PRN file which have 2 PDF document within it. It should then staple the document together. We successfully use the below to allow stapling@PJL...
View Article(WorkCentre 3045) 024-962 no paper error after solving paper jam
Hello, I had paper Jam in the WorkCentre 3045. I opened the back of the printer and removed the jam as indicated on the printer. Printer seems to be fine but when trying to print now I get a 024-962...
View ArticleDocument Centre 535 printer driver for Windows XP
I have a Document Centre 535 Digital Copier, in the user manual it mentions a printer driver available for Windows XP but I can't find it listed under the drivers section for this copier on xerox.com...
View ArticleWorkCenter 5865 - Not printing automatically to a default paper size
Hello, Im trying to configure this machine and every time a user print. e.g. " user is printing a letter size" " user is printing a legal size" their print out would go to one paper size only,...
View ArticleDC 8000 Fault: 007-346
HI, can somebody help me. My printer is sending me a Press Subsystem Fault: 007-346. The press is not available for print jobs. Thanks in advance for the help.
View ArticleCopy problem 6015
When I copy a full page document the copy comes out only half the document shows up with it centered on the paper in about a four inch wide strip.
View Article8400 print quality
I have an 8400DP and its print quality with its current settings with a Linux driver and with its previous Windows driver/settings is horrible. I thought it is supposed to be 2400dpi, but the output...
View Articlesaving color wax on 8400 by using just black as much as possible
I have an 8400DP and I am not sure how to turn off color from the Linux driver. Also, I can't figure out how to turn down color usage for sure; I noticed that gray areas are being filled in by...
View Article6700 DT has stopped accepting jobs
Hello, bit of a long shot but this has gottent a bit mysterious: We have a 6700 DT in the office which was always "tempermental" but worked more often then not, recently it started only accepting jobs...
View Articlexerox dc 5252 yellow color won't print
We hawe XEROX dc 5252 with fiery ex2000In last 2 weeks when we start printing yellow color missing.Somethime start printing yellow, then again stop.This is only when printing from rip. Also test files...
View ArticleXerox dc5252 error 10-367
We hawe xerox dc5252, and they refer 10-367 error (heat roll overheat fail).These message is first on start and these no way that roller is overheat.Did anibody know how to reset these error?Thanks
View ArticleClik here to view.
Phaser 7760 printing random pattern - red
It's been a while that we have trouble with our reds. You can see in the following pictures that the other colors are ok. Changing the red imaging unit for a new one brought absolutely no changes. The...
View ArticleXerox 5855 landscape staple
Printing and stapling in landscape - the staple is put at the top right position instead of the top left. Portrait stapling is correct. If you send a print job in portrait and landscape you can see the...
View ArticleEnabling Run Black Mode Xerox 8570 Colorqube
Hi, I was running a black/white job and noticed some striping so I did a clean, and of course it ate up the remaiing of my magenta and noted that I needed to replace. I did a re-start, and it...
View Article