Dark colours, grey smear
Trying to print business cards on matt paper but this machine puts a greyish background that isn't in the artwork. Secondly all colours printed are darker than how they appear on the screen. I don't...
View ArticleReduce 9x12 to 8.5 x 11
I'm trying to make a copy of a booklet that is printed on 9x12 paper. I want to reduce it to fit on 8.5 x 11, but I'm unable to figure out what settings to use..
View ArticleXPAF & z/OS 2.4 compatibility
What is the minimum level of XPAF that will run on z/OS 2.4?
View ArticlePaper jam in transfer module but no jam
I have checked all paths and there is not an ounce of paper but it is still asking me to clear jame
View ArticleFault Code 37,016.43:3347
HiDoes any one know what this fault code means: 37,016.43:3347It appeared on the printer display following a power cut.Thanks
View ArticleError 099-056
Hello,I have a colorQube 9202 that is displaying error 099-056. It states that printing and copying functions are disabled.can anyone tell me what this error is ?Thanks.Olivier.
View ArticleColorQube 8880DN Direct PDF printing
Hi, when attempting to print a PDF document directly to the printer, using either 'lp' or 'lpr' commands, i receive the following error:this printer is not configured to support direct PDF...
View ArticlePrint from bypass tray only does 2-3 pages then pulls from another tray
We have a Microsoft word document that we're trying to print to labels on the bypass tray with the lables loaded. When the job is sent it'll pull the lable paper correctly for 2 or three pages and then...
View ArticleBrand new printer and keeps jamming
I have taken delivery of a brand new 6510 today. All set up, selected 8.5" X 11" for A4 paper but everytime I try to print the page jams halfway out. It is also very hot when I open up the back to...
View ArticleClik here to view.
Everything is too yellow.
Whenever I print out a color publication from my computer, everything is comes out too yellow. Almost like a yellow filter is over everything. It really makes some pictures distorted looking. I've had...
View ArticleClik here to view.
Phaser 7800 printing with line
Hi everyone,We purchased the Phaser 7800 at the beginning of this year. The last few months when printing SRA3 a line (vertical) appears on the side of our prints (please see below photo). We have...
View ArticlePrinting 1 page out of 4 trays.
Hey all, I have a quick question regarding my xerox work center. I need to print Forms on different colored paper. White, pink, green and Yellow.1: Is there a way to tell the machine to print this one...
View ArticleClik here to view.
Black toner prints as grey (faded)
Being trying all the suggested solutions to sort this problem but with no luck. I'm hoping someone can help.I've tried adjusting the BTR and the Fusing Unit. the 1st is what its printing now, the 2nd...
View ArticleMaximum paper weight on MSI
Hello Everybody;Could your precise what is the maximum paper weight on MSI the Use Guide gives 120 sheets of 280 grammsand detailed specification goes 100 sheets of 300 grams I'am confused. Thanks for...
View ArticlePaper jam in Area 1 - WorkCentre 7345
I... inherited... a Xerox WorkCentre 7345, with the Office Finisher (coallates, staples, and punches holes) attached. Every time I try to print or copy, the paper gets stuck halfway thru the fuser. The...
View ArticleV180 prints skewed on 13x19
Is there any way to calibrate the machine for 13x19? I have a calibration chart and it works well for 11x17/12x18 but every time (and I print on it a lot) I use 13x19 the print comes out skewed by...
View ArticlePhaser 7800 Print Resolution
I'm a bit confused about the print resolution. I've found different specifications. Can someone please clarify which ones are correct?Printer Resolution (Service Manual)Standard 1200x600Enhanced...
View Articlevertical 1 inch blank line when printing
I have a ColorQube 8570 that started printing about a one inch, thick colored line down the left side of the paper. It looked as if all colors were printing at the same time through those jets in...
View ArticleCancelling a print job
Would I be right in thinking that the only way to cancel a print job once the printer (VersaLink C600) has received it is to choose Jobs on the control panel, select the current job and stop it...
View Articleno driver to support Phaser 6180DN printer for MacOS 10.14 Mojave
The website says it's under development. Any idea when it will be released? I would love to continue using my printer!
View Article