Faded printing red mainly affected
Getting a faded print. I'm on mobile so can't upload now but will do.Getting faded prints mainly in red and would run through all prints.Also some black toner spots like wasted toner.
View ArticlePrinting A3-size tabs
I've been successfully printing A4 sized tabs on my Versant 80, using the pre-cut Xerox stock. Xerox don't make an A3 tab for some reason, and even though I got a few blanks cut by my supplier I've...
View ArticlePhaser 7750 says replace Cyan toner when there's plenty of toner in the...
My Phaser 7750 has suddenly started telling me to replace the Cyan toner cartridge when there's at least 50% left in the cartridge. I thought it might be the cartridge, so I put another one in, same...
View ArticleWont print color
We have a printer that apparently stopped printing in color one day. A test page from the device prints color, but anything printed from a computer does not. There are multiple Windows 10 x64 computers...
View ArticleClik here to view.
printing defect
Hi everyone , I have the following defect in print .. It happens before going through the drum and the fuser.What can it be?
View ArticleVersant 180 / EX80 Custom paper / Paper catalog names changed to inches...
Directly after installing the FIT101903832 patch on our EX180 through Command Workstation (all previous patches had been installed), all our paper catalog entry names have started changing and now show...
View ArticleXerox WorkCentre 7830 won't print from Publisher 365
The Xerox 7830 refuses to print my Publisher 365 document which is a 4-up postcard, front and back. "Waiting for printer to respond: XRX9C934E54CF59" and it never responds. Other folks here at the...
View ArticlePrint side of MFP and printers
Hi,is there a way to know for each Xerox MFP or printer on which side of the paper and with which orientation does it print? User guides show how to load paper but nowhere it's said why to do so. I've...
View ArticlePrint parameter in UNIX for Black/White print
Hi there,We just upgraded the machine to VersaLink C7025. In windows sserver, I could easily enable the setting to print black and white only.Our Oracle EBS is running on HP Unix system. How can I set...
View ArticleClik here to view.
Xerox WorkCentre 7220 Clear Jam In Printer Left Side Top Door
We appear to have a "phantom jam" within the left hand top door (E) I've checked for any small pieces of paper however cannot see anything, plus I have used a vac to clear out the area but with no...
View ArticleLocal printer setting does not transfer over to rds session (Windows server...
Dear forum contributors!I have a complicated problem with Xerox 3320 and 3330 printers, so please bare with me. The state of the problem is as below. I am out of ideas, I tried everything I can...
View ArticlePrinting Full Page Magenta Color in background
I have a XEROX Versalink C500 Color laser printer. A few weeks ago it started printing FULL background color when printing simple black text (and anything else). Cannot find a solution to solve the...
View ArticleAltaLink states "job deleted by user" when leaving a print job unattended for...
I have someone who fills up every tray on their Xerox C8055, sends a massive job from their computer, and leaves for the night.Every time they come back in the morning, after between 25-35 minutes, the...
View ArticleStore file in folder print file size limit
TeamI'm unable to send file size more than 50mb with the store file in folder option. I searched xerox support and d110 user guide for the information and unfortunately no info available.Any suggestion...
View ArticleClik here to view.
Phaser 6510 prints are tilted/skewed
Using Phaser 6510. Recently, I started to notice my prints were becoming tilted clockwise by maybe 0.25 degrees. Doesn't seem like much, but it's definitely noticeable. It might even be skewed since...
View Articleprinter jams every time - paper printed halfway out, brand new printer
I just bought a Phaser 6510 - it works wireless for my old Apple laptop but will not print wireless from my Dell laptop. Does not matter which tray I use. The print starts and gets about 3/4 printed...
View ArticleCannot get pdf's to print in true black - Workcentre 7220
When we print color pdf files to our Workcentre 7220 using the PCL6 driver, black comes out as some sort of composite black with a brownish tint. I have tried all suggestions I have found for similar...
View Articleversalink b400 duplex in rdp not activable
the xerox versalink B400dn printer, in remote desktop, has the duplex function disabled. How can I activate it? In proprieties the fuction is in gray and is not activable like domain Administrator...
View ArticleUnable to add finisher to existing printer
The staple and hole punch options are not available to the users on a C8070 with Advanced finisher. How can a finsiher and features be added to the printer in the PrintSafe "Printer" menu? Thanks
View ArticleClik here to view.
printing page with points
i have a xerox WC 7845 i have this problem in photo when i printing.
View Article