Output tray option ignored for printing on A5 paper on WC 7970
Hi All, We recently installed a batch of WC 7970 on 2 customer's sites. All devices are fitted with the finisher.All drivers (GPD PS/PCL6, 7970 driver PS + PCL6) does allow the output tray selections...
View ArticleClik here to view.
Phaser 6200 leaves blank vertical areas (black only)
There are two vertical areas that don't print black. Colors print fine.Printer says toner cartridge is OK, and I did take the cartridge out and shake it.Imager and fuser replaced relatively...
View ArticlePhaser 8560 Error: 37,06.43: 49604
Hello! May ask your help try to solve my problem?I run into an error on a Phaser 8560 printer: 33,001.42:49455 I tried to solve it by turn the printer off and a few ours later turn on.It printed out...
View ArticleClik here to view.
Xerox Phaser 6280 Black streaks on left side of paper
I've recently been getting black streaks on the left side of my paper when I print with the Xerox 6280. There's no real pattern to the streak. Sometimes there are several that are close to each other...
View ArticleClik here to view.
Phaser 6500DN streaking/smearing problem
A few months ago we had issues with having c/m/y/b lines appearing across the page and had a repairman fix it. He mentioned that the fuser would be needing replaced soon. As you can see I get some...
View ArticleXerox 7500 Phaser Printer is smearing ink
We have an office printer(xerox 7500) that is smearing ink on the front and back of the pages. The printed side of the paper will have little spots missing ink. The back side of the paper has streaks...
View Articlecm215b black color faded (copy and print light gray)
Please help with my Fuji Xerox docu print cm215b, the result for the black color copy or print faded, very light gray, even though my ink black full and even I change it to a new genuine cartridge. the...
View ArticleSecure Print is printing every other time and Normal print works every time
Hello, I have tried a few different drivers on a Xerox C8070 but I can't seem to make Secure print work every time. If I print the same page 3 times, the middle page will not show up in the printer...
View Articlehttps://www.youtube.com/watch?v=vci6vYtzGAg
https://www.youtube.com/watch?v=vci6vYtzGAg
View ArticleXerox 6515: Printing error report
Whenever my printer produces an error (for exemple: a scan that went wrong), the error comes up on the screen AND a report is printed. How can I prevent the printer to print out that report?
View ArticleClik here to view.
016-910 message
Hi! I have a problem with new VersaLink C7025 with printing.When try to print something the machine give an error as on the picture.tried many ways to solve it - updated firmware. tried diffrent...
View ArticleVersant 2100 print issue
Hi there, I have been having this problem and it seems like nobody can help. Everytime I am printing on coated TEXT (100 lbs) stock, there's a LOT of jam happening (078-150 & 078-156). Almost every...
View ArticleVersant 80 Tray 5 Size Issue
Hi, I successfully duplexed on regular 8.5x11 paper in tray 1. When I tried to do the same with 110 lb cardstock (the previous prints were tests), it would not print front and back on the heavier...
View ArticleClik here to view.
Phaser 7750dn imaging problems
Hello again, I was hoping someone could point me in the correct direction here.My Phaser 7750dn, has had a lot of work lately,Refurbished image and process controller boards New frame with the...
View ArticleD110 Secure Print Job Timeout
Is there a way to set a timeout time for secure print jobs on the D110? After a while jobs that were never released start piling up and the only way to clear is reboot or manually delete (which is no...
View ArticleXerox 7800DN problem with toner cartridges
Hi! I Need help. I brought printer in Estonia, after start cartriges i insert cartriges buyed on ebay (germany). Now i brought original toners in Estonia and they don't accepted by printer. Seller says...
View ArticleClik here to view.
Black Toner Smearing WorkCentre 7220i
I have a Xerox WorkCentre 7220i that has recently started having issues with the black portions of color printouts not fusing to the page and smearing across the page. We recently had the laser...
View ArticleNeed an older printer driver
Hello everyone, I need the Xerox GPD PCL 6 in Version 5520.600.0.0 for Windows 10 and 7 x64. We are needing this because the new drivers seem incompatible with the ones in our Citrix Servers. The...
View Article